Spray.Bike Historic Collection 400ml Bicycle Paint

Spray.Bike Historic Collection 400ml Bicycle Paint

Spray.Bike is the first-ever range of bike-specific color coatings designed for both amateur and professional use.

Spray.Bike paint is a pigment-rich dry matte powder coating that does not drip in any way and is revolutionary in terms of ease of use and the quality of the finish. A 400ml spray can covers a bicycle frame and fork with a single coat. For steel, aluminum and even carbon parts.

The Historic Collection consists of a range of classic colors.

Solid color technical specifications

• Highly pigmented acrylic paint
• Dry fall powder coating
• Non-drip, non-dribble formula
• No primer required
• Suitable for steel, aluminum and carbon (carbon) surfaces
• Permanent and resilient: UV resistant and weather resistant
• Deep, matte colors
• Easy to handle for stenciling and blending effects, among other things
• Requires no equipment or post-application heat treatment
• For a satin or glossy top coat, finish with Spray.Bike Frame Builder’s Transparent Finish – Satin / Gloss. For a matte top coat, finish with Frame Builder’s Transparent Finish – Matte or regularly use Frame Builder’s Top Wax.
• 400 ml and 200 ml options
• 1 x 400ml aerosol covers a frame and fork in a single coat
• Minimum recommended layers: one

Instructions for use

• Make sure the surface is degreased, clean and dry
• Wear protective gloves, protective clothing, eye/face protection
• Always paint in an open area in the open air
• Shake the can for at least 3 minutes before use
• Test the spray for 2-3 seconds before applying
• Optimal temperature for spraying: 20-25°C. Do not use Spray.Bike if the temperature is below 10°C or above 35°C, or if the relative humidity is above 75%</li >
• Always spray with the can in a vertical position, otherwise the paint could “spit” unevenly
• Solid colors: spray surface at a distance of 5-12 cm
• Pocket Clears, Frame Builder’s Smoothing Putty, Frame Builder’s Transparent Finish, Frame Builder’s Cold-Zinc, Frame Builder’s Metal Primer, Frame Builder’s Carbon Primer, Frame Builder’s Metal Plating: spray the surface from a distance of at least 20 cm </ li >
• Keirin Flake and Keirin Sunlight: spray the surface from a distance of at least 30 cm
• Frame Builder’s Top Wax: Spray onto a paper towel or soft lint-free cloth and apply gently
• Always keep hand moving while spraying
• Allow to dry before applying 2nd coat (the paint dries within 10 minutes, full cure: 2 hours)
• At the end you can turn upside down and spray for 2 seconds before putting the can away (prevents future clogging)
• Protect tin from sunlight and temperatures above 50 ° C / 122 ° F

Optimal temperature for spraying: 20-25°C. Do not use Spray.Bike if the temperature is below 10°C or above 35°C, or if relative humidity is above 75%